XMEP060BT11F

Electronic pressure sensors, Pressure sensors XM, transmitter, XMEP, 60 bar, G1/4 A male, 0,5...4,5 V, Deutsch, set 1

arrow

Commercialized

green premium

Expand all

Datasheet

Range of product
Telemecanique Pressure sensors XM
Product or component type
Electronic pressure sensors
Pressure sensor type
Pressure transmitter
Pressure sensor name
XMEP
Electrical circuit type
Control circuit
Pressure rating
60 bar
Local display
Without
Controlled fluid
Fresh water (0…125 °C)
Air (-30…125 °C)
Hydraulic oil (-30…125 °C)
Fluid connection type
G 1/4A (male) conforming to DIN 3852-E
Electrical connection
DEUTSCH connector DT04-3P 3 pins
[Us] rated supply voltage
5 V DC SELV (voltage limits: 4.5…5.5 V)
Current consumption
< 7 mA
Type of output signal
Analogue
Analogue output function
0.5...4.5 V, 3-wire
Quantity per set
Set of 1
Type of packing
Individual
Pressure setting range
0…60 bar
Maximum permissible accidental pressure
150 bar
Destruction pressure
300 bar
Materials in contact with fluid
Stainless steel AISI 316L
Fluorocarbon FPM
Operating position
Any position
Protection type
Load short-circuit
Reverse polarity
Electromagnetic compatibility
Electrostatic discharge immunity test conforming to ISO 10605 criteria A 15 kV air, 15 kV contact
Susceptibility to electromagnetic fields conforming to ISO 11452-2 criteria A 100 V/m 200…2000 MHz
Susceptibility to electromagnetic fields conforming to ISO 11452-4 criteria A 100 mA 20…400 MHz
Susceptibility to conducted disturbances conforming to EN/IEC 61000-4-6 criteria A 30 V 0.15...80 MHz
Electrical fast transient/burst immunity test conforming to EN/IEC 61000-4-4 criteria A 4 kV
Susceptibility to conducted transient disturbances conforming to ISO 7637-2 criteria B level 3
[Uimp] rated impulse withstand voltage
0.5 kV
Response time on output
<= 2 ms 10...90 % of full scale
Measurement accuracy
+/- 0.5 % of the measuring range
Accuracy
0.1 % of the measuring range
Drift of the sensitivity
+/- 0.02 % of measuring range/°K
Drift of the zero point
+/- 0.02 % of measuring range/°K
Repeat accuracy
+/- 0.5 % of the measuring range
Mechanical durability
10000000 cycles
Net weight
0.098 kg
Diameter
26 mm
Length
65.5 mm
Standards
UL 61010-1
ISO 13766
ISO 14982
EN/IEC 61326-2-3
EN 13309
ECE 10R-5
Product certifications
CE
cULus
E2
Ambient air temperature for operation
-40…100 °C
Ambient air temperature for storage
-50…100 °C
Vibration resistance
12 gn sinus (f = 20…520 Hz) test 4 conforming to ISO 16750-3
18 gn random (f = 10…2000 Hz) test 4 conforming to ISO 16750-3
Shock resistance
50 gn for 11 ms conforming to EN/IEC 60068-2-27
IP degree of protection
IP65 conforming to EN/IEC 60529
IP67 conforming to EN/IEC 60529
IP69K conforming to EN/IEC 60529
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.600 cm
Package 1 Width
4.400 cm
Package 1 Length
8.700 cm
Package 1 Weight
98.000 g
Unit Type of Package 2
S01
Number of Units in Package 2
24
Package 2 Height
15.000 cm
Package 2 Width
15.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
2.551 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Yes
Circularity Profile
No need of specific recycling operations
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Expand all

Technical Drawings

Dimensions

epds
  • (1) SW24, tightening torque ⩽ 24 N-m / 212 lb-in

Connections and Schema

Connector Wiring

epds
  • (1) V out

Performance Curves

Curves

epds

Back to top

arrow