XCMN2102L5

Limit switch, Limit switches XC Standard, XCMN, steel roller plunger, 1NC+1 NO, snap, 5 m

To be discontinued Datum ukončení komercializace : 30 December 2024 Datum ukončení poskytování služeb : 30 December 2024

green premium

XCMN2102L5 is replaced by the following product:

img
XCMH2102L5

XCMH Limit Switches Miniature Plastic Metal Roller Plunger NC + NO Snap L5

Commercialised

Commercialised

Quantity :  1

Rozbalit vše

Katalogový list

Range of product
Telemecanique Limit switches XC Standard
Series name
Standard format
Product or component type
Limit switch
Device short name
XCMN
Sensor design
Miniature
Body type
Fixed
Head type
Plunger head
Material
Plastic
Body material
Plastic
Head material
Zamak
Fixing mode
By the body
Movement of operating head
Linear
Type of operator
Spring return roller plunger metal
Type of approach
Lateral approach, 2 directions
Number of poles
2
Contacts type and composition
1 NC + 1 NO
Contact operation
Snap action
Switch actuation
By 30° cam
Electrical connection
Fixed cable
Cable length
5 m
Cable composition
4 x 0.75 mm²
Wire insulation material
PvR
Contacts insulation form
Zb
Positive opening
With
Positive opening minimum force
35 N
Minimum force for tripping
7 N
Maximum actuation speed
0.5 m/s
Contact code designation
B300, AC-15 (Ue = 240 V), Ie = 1.5 A conforming to IEC 60947-5-1 appendix A
R300, DC-13 (Ue = 250 V), Ie = 0.1 A conforming to IEC 60947-5-1 appendix A
[Ui] rated insulation voltage
300 V (pollution degree 3) conforming to UL 508
400 V (pollution degree 3) conforming to IEC 60947-5-1
300 V (pollution degree 3) conforming to CSA C22.2 No 14
Maximum resistance across terminals
25 MOhm conforming to IEC 60255-7 category 3
[Uimp] rated impulse withstand voltage
4 kV conforming to IEC 60664
4 kV conforming to IEC 60947-1
Short-circuit protection
6 A cartridge fuse, type gG
Electrical durability
5000000 cycles, DC-13, 120 V, 1 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, 24 V, 3 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, 48 V, 2 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
Mechanical durability
5000000 cycles
Width
30 mm
Height
70.4 mm
Depth
16 mm
Shock resistance
25 gn for 18 ms conforming to IEC 60068-2-27
Vibration resistance
5 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
IP degree of protection
IP65 conforming to IEC 60529
IK degree of protection
IK04 conforming to IEC 62262
Electrical shock protection class
Class II conforming to IEC 61140
Class II conforming to NF C 20-030
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…70 °C
Protective treatment
TC
Product certifications
UL
CSA
CCC
Standards
IEC 60947-5-1
UL 508
IEC 60204-1
CSA C22.2 No 14
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
2.5 cm
Package 1 Width
19.0 cm
Package 1 Length
19.0 cm
Package 1 Weight
371.0 g
Unit Type of Package 2
PAL
Number of Units in Package 2
160
Package 2 Height
60.0 cm
Package 2 Width
80.0 cm
Package 2 Length
160.0 cm
Package 2 Weight
74.0 kg
Unit Type of Package 3
S03
Number of Units in Package 3
20
Package 3 Height
30.0 cm
Package 3 Width
30.0 cm
Package 3 Length
40.0 cm
Package 3 Weight
8.352 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Yes
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months

Rozbalit vše

Technické výkresy

Dimensions

epds
  • (1) 2 fixing holes Ø 4.2 mm, counterbored Ø 8 mm by 4 mm deep.
  • (2) External diameter 7.5 mm.

Mounting

Sweep of Connecting Cable

epds
  • (1) : Recommended
  • (2) : To be avoided

Mounting

Mounting with Spacers

epds
  • (1) : Recommended
  • (2) : To be avoided
  • (1) : 2 spacers supplied with the XCMN switch
  • (2) : 2 screws Ø 4mm (not included)

Setting-up

Plunger or Multi-directional Heads

epds

Wiring diagram

2-pole NC + NO Snap Action

epds
  • (BK) Black
  • (BK-WH) Black White
  • (BN) Brown
  • (BU) Blue

Characteristics of Actuation

Switch Actuation by 30° Cam

epds

Functionnal Diagram

epds
  • (P) Positive opening point
  • (A) Cam displacement
  • (1) NC contact with positive opening operation
  • (2) Closed
  • (3) Open
  • (4) Tripping
  • (5) Resetting
  • (BK) Black
  • (BK-WH) Black White
  • (BN) Brown
  • (BU) Blue

Rozbalit vše

Dokumenty ke stažení

Back to top

arrow