XS106B3PAM8TQ
Inductive sensor XS1 Ø6.5, L42.5mm, stainless, Sn2.5mm, 12..24VDC, M8
Discontinued End of commercialization date : 31 December 2020 End of service date : 31 December 2020
XS106B3PAM8TQ is replaced by the following product:
Quantity : 1
Expand all
Datasheet
Range of product
Telemecanique Inductive proximity sensors XS
Series name
General purpose
Sensor type
Inductive proximity sensor
Sensor name
XS1
Sensor design
Cylindrical Ø 6.5 mm plain
Size
42 mm
Body type
Fixed
Detector flush mounting acceptance
Flush mountable
Material
Metal
Type of output signal
Discrete
Wiring technique
3-wire
[Sn] nominal sensing distance
2.5 mm
Discrete output function
1 NO
Output circuit type
DC
Discrete output type
PNP
Electrical connection
Male connector M8, 3 pins
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Switching capacity in mA
<= 200 mA with overload and short-circuit protection
IP degree of protection
IP65 conforming to IEC 60529
IP67 conforming to IEC 60529
IP67 conforming to IEC 60529
Sale per indivisible quantity
20
Detection face
Frontal
Front material
PPS
Enclosure material
Stainless steel 303
Operating zone
0…2 mm
Differential travel
1...15% of Sr
Status LED
Output state: 1 LED (yellow)
Supply voltage limits
10…36 V DC
Switching frequency
<= 2500 Hz
Maximum voltage drop
<2 V (closed)
Current consumption
<= 10 mA no-load
Maximum delay first up
10 ms
Maximum delay response
0.2 ms
Maximum delay recovery
0.2 ms
Marking
CE
Length
42 mm
Net weight
0.32 kg
Product certifications
CSA
UL
UL
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…85 °C
Vibration resistance
25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6
Shock resistance
50 gn for 11 ms conforming to IEC 60068-2-27
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Sustainable offer status
Green Premium product
EU RoHS Directive
Mercury free
Yes
RoHS exemption information
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Technical Drawings
Dimensions
- (1) LED
Minimum Mounting Distances in mm
- e (1) ≥ 5 mm/0.20 in.
- e (1) ≥ 5 mm/0.20 in.
- e (2) ≥ 30 mm/1.18 in.
- e (1) ≥ 5 mm/0.20 in.
- e (2) ≥ 30 mm/1.18 in.
- e (3) ≥ 8 mm/0.31 in.
Wiring Schemes
Performance Curves
Standard Steel Target : 8x8x1 mm
- (1) Pick-up points
- (2) Drop-out points (object approaching from the side)
- (y) Sensing distance in mm
Expand all
Documents & Downloads
Document name
Date
Size
11/23/2023
18.7 MB
11/29/2023
18.8 MB
2/10/2024
19.1 MB
11/29/2023
18.9 MB
Document name
Date
Size
11/23/2023
195.3 kB
Back to top
