XS1L04PA311L2
Inductive sensor XS1 Ø4 - L28mm - stainless - Sn0.8mm - 5..24VDC - cable 10m
Discontinued End of commercialization date : 12 January 2022 End of service date : 12 January 2022
Expand all
Datasheet
Range of product
Telemecanique Inductive proximity sensors XS
Series name
General purpose
Sensor type
Inductive proximity sensor
Device application
-
Sensor name
XS1
Sensor design
Cylindrical Ø 4 mm plain
Size
28 mm
Body type
Fixed
Detector flush mounting acceptance
Flush mountable
Material
Stainless steel
Type of output signal
Discrete
Wiring technique
3-wire
[Sn] nominal sensing distance
0.8 mm
Discrete output function
1 NO
Output circuit type
DC
Discrete output type
PNP
Electrical connection
Cable
Cable length
10 m
[Us] rated supply voltage
5...24 V DC
Switching capacity in mA
<= 100 mA with overload and short-circuit protection
IP degree of protection
IP67 conforming to IEC 60529
Detection face
Frontal
Front material
PPS
Enclosure material
Stainless steel 303
Operating zone
0…0.6 mm
Cable composition
3 x 0.11 mm²
Wire insulation material
PVC
Status LED
Output state: 1 LED (yellow)
Supply voltage limits
5…30 V DC
Switching frequency
<= 5000 Hz
Maximum voltage drop
<2 V (closed)
Current consumption
<= 10 mA no-load
Maximum delay first up
5 ms
Maximum delay response
1 ms
Maximum delay recovery
1 ms
Marking
CE
Threaded length
0 mm
Length
28 mm
Net weight
0.345 kg
Product certifications
CSA
UL
UL
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…85 °C
Vibration resistance
25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6
Shock resistance
50 gn for 11 ms conforming to IEC 60068-2-27
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.5 cm
Package 1 Width
8 cm
Package 1 Length
14.7 cm
Package 1 Weight
49 g
Sustainable offer status
Green Premium product
EU RoHS Directive
Mercury free
Yes
RoHS exemption information
Warranty
18 months
Expand all
Technical Drawings
Dimensions
- (1) LED
Minimum Mounting Distances in mm
- e (1) ≥ 2 mm/0.79 in.
- e (1) ≥ 2 mm/0.79 in.
- e (2) ≥ 12 mm/0.47 in.
- e (1) ≥ 2 mm/0.79 in.
- e (2) ≥ 12 mm/0.47 in.
- e (3) ≥ 3 mm/0.12 in.
- e (1) ≥ 2 mm/0.79 in.
- e (2) ≥ 12 mm/0.47 in.
- e (3) ≥ 3 mm/0.12 in.
- d ≥ 4 mm/0.16 in.
- h ≥ 0 mm/0 in.
Tightening torque : 2.2 N.m. (values obtained with washers mounted)
Mounting
- (1) Bending cable: 4 x external cable diameter
Wiring Schemes
- BU : Blue
- BN : Brown
- BK : Black
Performance Curves
Standard Steel Target (mm) : 5x5x1
- Pick-up points
- Drop-out points (object approaching from the side)
- (y) Sensing distance in mm
Expand all
Documents & Downloads
Document name
Date
Size
11/22/2023
331.5 kB
Document name
Date
Size
11/22/2023
195.3 kB
Document name
Date
Size
11/29/2023
122.2 kB
Back to top
