XX230A11HA00M12

Ultrasonic sensor cylindrical M30 - Sn=1m - pump in NO PNP sync - M12

Discontinued End of commercialization date : 10 March 2022 End of service date : 10 March 2022

XX230A11HA00M12 is replaced by the following product:

img
XXS30P1PM12

Ultrasonic sensors XX, ultrasonic sensor, plastic, cylindrical M30, straight, 1 m, PNP

Commercialised

Commercialised

Quantity :  1

Expand all

Datasheet

Range of product
Telemecanique Ultrasonic sensors XX
Sensor type
Ultrasonic sensor
Series name
Application
Sensor name
XX2
Sensor design
Cylindrical M30
Detection system
Diffuse
[Sn] nominal sensing distance
1 m adjustable with teach push-button
Material
Plastic
Type of output signal
Discrete
Discrete output function
1 NC + 1 NO
Wiring technique
5-wire
Discrete output type
PNP
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Electrical connection
Male connector M12 5 pins
Product specific application
For 2 filling levels monitoring
[Sd] sensing range
0.051…0.991 m
Beam angle
10 °
IP degree of protection
IP67 conforming to IEC 60529
Enclosure material
ULTEM
Front material
Silicone
Thread type
M30 x 1.5
Supply voltage limits
10…28 V DC
Function available
With synchronisation mode
[Sa] assured operating distance
0.051…0.991 m (teach mode)
Maximum differential travel
2.5 mm
Blind zone
0…51 mm
Transmission frequency
200 kHz
Repeat accuracy
0.9 %
Deviation angle from 90° of object to be detected
-10…10 °
Minimum size of detected object
Cylinder diameter 1.6 mm at 0.635 m
Status LED
Output state: 1 LED (green/red (flashing))
Setting-up assistance: 1 LED (green/red (flashing))
Distance indication: 1 LED (yellow)
Current consumption
100 mA
Maximum switching current
100 mA with overload and short-circuit protection
Maximum voltage drop
1 V
Maximum delay first up
1000 ms
Maximum delay response
150 ms
Maximum delay recovery
1000 ms
Marking
CE
Threaded length
45 mm
Height
35 mm
Width
35 mm
Depth
85 mm
Net weight
0.091 kg
Standards
IEC 60947-5-2
Product certifications
cCSAus
UL
Ambient air temperature for operation
0…50 °C
Ambient air temperature for storage
-10…80 °C
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 (f = 10…55 Hz)
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Resistance to electrostatic discharge
8 kV level 4 conforming to IEC 61000-4-2
Resistance to electromagnetic fields
10 V/m level 3 conforming to IEC 61000-4-3
Resistance to fast transients
1 kV level 3 conforming to IEC 61000-4-4
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.2 cm
Package 1 Width
13 cm
Package 1 Length
9.5 cm
Package 1 Weight
126 g
EU RoHS Directive
Not applicable, out of EU RoHS legal scope
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Expand all

Technical Drawings

Dimensions

epds

Minimum Mounting Distances

Side by side

epds
  • e : respect the distances indicated on the detection curves

Minimum Mounting Distances

Face to face

epds
  • e : respect the distances indicated on the detection curves
  • e > 4 x Sn

Wiring Diagram

Connector

epds
  • (1) (+) Brown
  • (2) NO output (White)
  • (3) (-) Blue
  • (4) NO output (Black)
  • (5) Synchronisation (Grey)

Wiring Diagram

NO + NO Outputs, PNP

epds
  • (1) (+) Brown
  • (2) NO output (White)
  • (3) (-) Blue
  • (4) NO output (Black)
  • (5) Synchronisation (Grey)
  • BN Brown
  • WH White
  • BU Blue
  • BK Black
  • GY Grey
  • (1) Open = burst
  • Close = no burst

Curves

epds
  • (1) Parallel movement
  • (2) Distance
  • (3) Blind zone for diffuse sensors.

Operating Curves

epds
  • (1) Adjustable detection zone
  • (2) Output deactivated
  • (3) Output activated
  • (4) NO output

Expand all

Documents & Downloads

Document name
Date
Size

Expand all

Related products & accessoires

img
XSZB130

Inductive proximity sensors XS, accessory for sensor, Ø 30 mm, fixing clamp with indexing, plastic

img
XUZ2001

Photoelectric sensors XU, accessory for sensor, 3D fixing kit, M12 rod

img
XUZ2003

Photoelectric sensors XU, accessory for sensor, 3D fixing kit, support for M12 rod

img
XUZB2030

Photoelectric sensors XU, accessory for sensor, 3D fixing kit, bracket with ball joint, Ø 30 mm

img
XXZ30

Accessory for XX6, 90° fixing bracket, metallic

img
XZCC12FCM40B

Female, M12, 4 pin, elbowed connector, cable gland Pg 7

img
XZCC12FCP40B

Female, M12, 4 pin, elbowed connector, cable gland Pg 7

img
XZCC12FDM40B

Female, M12, 4 pin, straight connector, cable gland Pg 7

img
XZCC12FDP40B

Female, M12, 4 pin, straight connector, cable gland Pg 7

img
XZCP1141L2

Pre wired connectors XZ, straight female, M12, 4 pins, cable PUR 2 m

img
XZCP1241L2

Pre wired connectors XZ, elbowed female, M12, 4 pins, cable PUR 2 m

Back to top

arrow