XXW54P3HPL01DM6

Ultrasonic sensor, plastic, Wide Beam Φ54, 3m, 0.5…4.5V+PNP, 0.15m cable+ 6pin Deutsch male connector

arrow

Commercialized

Expand all

Datasheet

Range of product
Telemecanique Ultrasonic sensors XX
Sensor type
Ultrasonic sensor
Series name
Application
Sensor name
XXS
Sensor design
Ø 54 mm
Detection system
Diffuse
[Sn] nominal sensing distance
3 m software with kit
Material
Plastic
Type of output signal
Analogue + discrete
Discrete output function
1 NO or 1 NC programmable
Wiring technique
5-wire
Discrete output type
PNP
Analogue output function
0.5...4.5 V
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Electrical connection
Remote male connector DTM04-6P 5 pins, 0.15 m cable length
[Sd] sensing range
0.425…3 m
Beam angle
50 °
IP degree of protection
IP65 conforming to IEC 60529
IP67
IP69K
Enclosure material
Valox
Front material
Ultem
Supply voltage limits
9…32 V DC
Function available
Software configurable
[Sa] assured operating distance
0.425…3 m (configurator software)
Maximum differential travel
20 mm
Blind zone
425 mm
Transmission frequency
48 kHz
Repeat accuracy
0.1 %
Minimum size of detected object
Cylinder diameter 12 mm at 3 m
Status LED
Output state: 1 LED (yellow)
Echo state and power ON: 1 LED (green/white)
Current consumption
30 mA
Maximum switching current
100 mA with overload and short-circuit protection
Maximum switching capacity
>= 2 kOhm overload and short-circuit protection
Maximum voltage drop
2 V
Switching frequency
<= 1.6 Hz
Setting-up
Configurator software
Maximum delay first up
400 ms
Maximum delay response
300 ms
Maximum delay recovery
300 ms
Marking
CE
Height
54 mm
Width
79 mm
Depth
32.5 mm
Net weight
0.115 kg
Standards
IEC 60947-5-2
CSA C22.2 No 14
UL 508
Product certifications
cULus
E2
Ambient air temperature for operation
-40…70 °C
Ambient air temperature for storage
-40…85 °C
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 (f = 10…55 Hz)
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Resistance to electrostatic discharge
8 kV 8 kV air, 4 kV contact conforming to IEC 61000-4-2
Resistance to electromagnetic fields
10 V/m level 3 conforming to IEC 61000-4-3
Resistance to fast transients
2 kV conforming to IEC 61000-4-4
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.000 cm
Package 1 Width
9.500 cm
Package 1 Length
13.000 cm
Package 1 Weight
150.000 g
Unit Type of Package 2
S01
Number of Units in Package 2
11
Package 2 Height
15.000 cm
Package 2 Width
15.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
1.900 kg
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Yes
WEEE
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months

Expand all

Technical Drawings

Dimensions

epds

(1): The sensor is supplied with 2 stainless steel inserts and 2 silicone washers. M4 screws not provided.

Connection and schema

Connection and schema

Connector wiring

epds
Pin Number Wire Color Description
1 BN: Brown + 12...24 V
2 BU: Blue 0 V
3 BK: Black 0.5...4.5 V Analog Output
4 WH: White PNP Digital Output
5 - Not Connected (sealing plug)
6 GY: Grey Synchronization

Connector model: Deutsch connector DTM04 male 6-pin

(1): Synchronization

(2): Output 2

(3): Output 1

Connection and schema

Connection and schema

Wiring diagram

epds

(1): Synchronization

Analog output load: 2 kΩ…∞

Connection and schema

Synchronization function diagram (side by side application)

epds

(1): Synchronization

Note: Up to 8 sensors can be synchronized to operate side by side by electrically connecting all pin no.6 (grey) wires together. All sensors must be the same model and have the same cycle time setting.

Performance Curves

Performance Curves

Detection curve with 100 x 100 mm / 3.94 x 3.94 inches square target

epds

(X): Target distance

(Y): Detection limit

(1): Blind zone: 425 mm / 16.7 inches

(2): Far limit

(3): Sn max.

(4): 100 x 100 mm / 3.94 x 3.94 inches stainless steel plate

Performance Curves

Detection curve with round bar

epds

(X): Target distance

(Y): Detection limit

(1): Blind zone: 425 mm / 16.7 inches

(2): Sn max.

(3): Ø 10 mm / 0.394 inches stainless steel cylinder

(4): Ø 25 mm / 0.984 inches stainless steel cylinder

L: 1 m / 3.28 ft.

Mounting and Clearance

Mounting and Clearance

Flush mounting recommendations

epds

(1): E max: 10 mm / 0.39 in.

(2): Ø min: 33 mm / 1.3 in.

Mounting and Clearance

Tightening torque

epds

A ≤ 3 Nm / 26.6 Ib-in

(1): 2 silicone washers provided with the sensor

(2): 2 stainless steel inserts provided with the sensor

(3): 2 M4 screws (not provided)

Mounting and Clearance

Mutual interference between two separate pieces of mobile equipment, side by side

epds

Sensors in the same mobile equipment must be synchronized, but sensors in two separate pieces of mobile equipment cannot be synchronized

D min: 2,5 m /8.2 ft.

Note: For the side by side use, consider the machine manufacturer's prescriptions without ever going below the 2,5 m / 8.2 ft.

Expand all

Related products & accessoires

img
XXZKITDM6

Ultrasonic Configuration accessory, jumper M12 Male 4-pin to Deutsch Female 6-pin connector

Back to top

arrow