XY2CEDA290EX

Dual emergency stop rope pull switch, Telemecanique Emergency stop rope pull switches XY2C, e EX, 2x(1NC+1NO), boot. pb

arrow

Commercialized

green premium

Expand all

Datasheet

Range of product
Telemecanique Emergency stop rope pull switches XY2C
Product or component type
Dual emergency stop rope pull switch
Device short name
XY2CED
Local signalling
Without pilot light
Reset
By booted push-button
Contacts type and composition
2 x (1 NC + 1 NO)
Trigger cable anchor point
RH and LH sides
Number of cables
2
Trigger cable maximum length
2 x 70 m
2 x 100 m
Housing colour
Red RAL 3000
Auxiliary contacts operation
Slow-break
Connections - terminals
Screw clamp terminal, 1 x 0.5...2 x 1.5 mm²
Tightening torque
0.8…1.2 N.m
Cable entry number
1 plain hole for ISO M20 cable gland
2 plain hole with blanking plug for
Marking
II2 D-Ex tb IIIC T85°C Db IP65
Safety level
Can reach PL = e with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1
Can reach category 4 with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1
Can reach SIL 3 conforming to EN/IEC 61508
Safety reliability data
B10d = 300000 value given for a life time of 20 years limited by mechanical or contact wear
Mechanical durability
60000 cycles
Distance between cable supports
10 m
[Ie] rated operational current
3 A at 240 V, AC-15, A300 conforming to EN/IEC 60947-5-1 appendix A
0.27 A at 250 V, DC-13, Q300 conforming to EN/IEC 60947-5-1 appendix A
[Ithe] conventional enclosed thermal current
10 A
[Ui] rated insulation voltage
400 V (pollution degree 3) conforming to EN/IEC 60947-1
300 V conforming to UL 508
300 V conforming to CSA C22.2 No 14
[Uimp] rated impulse withstand voltage
4 kV
Positive opening
With conforming to EN/IEC 60947-5-1 section 3
Maximum resistance across terminals
25 MOhm conforming to EN/IEC 60255-7 category 3
25 MOhm conforming to NF C 93-050 method A
Short-circuit protection
10 A cartridge fuse type gG conforming to EN/IEC 60269
Width
195 mm
Depth
105 mm
Height
142 mm
Standards
EN/IEC 60079-0
EN/IEC 60079-31
Directives
2014/34/EU - ATEX directive
Dust zone
Zone 21 - 22
Product certifications
INERIS 04ATEX0015
IEC-Ex INE 16.0001X
Protective treatment
TC
Ambient air temperature for operation
-20…60 °C
Ambient air temperature for storage
-40…70 °C
Vibration resistance
10 gn (f= 10…300 Hz) conforming to EN/IEC 60068-2-6
Shock resistance
50 gn 11 ms conforming to EN/IEC 60068-2-27
Electrical shock protection class
Class I conforming to EN/IEC 61140
Class I conforming to NF C 20-030
IP degree of protection
IP65
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
11.43 cm
Package 1 Width
16.26 cm
Package 1 Length
31.75 cm
Package 1 Weight
2.02 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Yes
Circularity Profile
No need of specific recycling operations
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Expand all

Technical Drawings

Dimensions

Without Tensioner

epds
  • (1) 3 untapped holes for inserting cables in the ATEX certified ISO M20 cable gland
  • (2) 4 elongated holes for screw with a 6 mm / 0.24 in. diameter

Dimensions

With Tensioners

epds
  • (1) 3 untapped holes for inserting cables in the ATEX certified ISO M20 cable gland
  • (2) 4 elongated holes for screw with a 6 mm / 0.24 in. diameter
  • (1) 3 untapped holes for inserting cables in the ATEX certified ISO M20 cable gland
  • (2) 4 elongated holes for screw with a 6 mm / 0.24 in. diameter

Electrical Curves

AC Supply 50/60 Hz. Inductive Circuit

epds
  • (y) Millions of operating cycles
  • (x) Current in A

Electrical Curves

Voltage V 24 48 120
W 13 9 7

Mounting and Clearance

Adjustment Values (With End Spring)

epds
  • In grey : Prohibited zone

Expand all

Related products & accessoires

img
XY2CZ105

Telemecanique Emergency stop rope pull switches XY2C, red galvanised cable, Ø 5 mm, L 50.5 m, for XY2C

img
XY2CZ107

Telemecanique Emergency stop rope pull switches XY2C, red galvanised cable, Ø 5 mm, L 70.5 m, for XY2C

img
XY2CZ110

Telemecanique Emergency stop rope pull switches XY2C, red galvanised cable, Ø 5 mm, L 100.5 m, for XY2C

img
XY2CZ213

Telemecanique Emergency stop rope pull switches XY2C, XY2CED & XY2CE tensioner

img
XY2CZ601

Telemecanique Emergency stop rope pull switches XY2C, fixed cable support, for XY2C

img
XY2CZ708

Telemecanique Emergency stop rope pull switches XY2C, pulley for cable Ø 5 mm maximum, for XY2C

img
XY2CZ704

Telemecanique Emergency stop rope pull switches XY2C, cable end protector, Ø 5 mm, for XY2C

img
XY2CZ705

Telemecanique Emergency stop rope pull switches XY2C, pulley bracket, for XY2CH XY2CE

img
XY2CZ524

Telemecanique Emergency stop rope pull switches XY2C, cable clamp, Ø 5 mm, for XY2C

img
XY2CZ404

Telemecanique Emergency stop rope pull switches XY2C, turnbuckle M8, for XY2C

img
XY2CZ702

Telemecanique Emergency stop rope pull switches XY2C, end spring, for XY2CE

Back to top

arrow