XCRT315

Limit switch, Limit switches XC Standard, XCRT, polyester enclosure stainless steel roller with lever, 2C/O

arrow

Commercialized

green premium

Expand all

Datasheet

Range of product
OsiSense XC
Series name
Special format
Product or component type
Limit switch
Product specific application
For conveyor belt shift monitoring
Device short name
XCRT
Sensor design
-
Body type
Fixed
Head type
Rotary head
Material
Polyester
Fixing mode
By the body
Movement of operating head
Rotary
Type of operator
Spring return roller stainless steel with lever
Type of approach
Lateral approach, 2 directions
Electrical connection
Screw-clamp terminals, clamping capacity: 1 x 0.5...2 x 2.5 mm²
Number of poles
2
Contacts type and composition
2 C/O
Contact operation
Snap action
Contact block per direction [control circuit]
2 per direction
Positive opening
Without
Body material
Polyester
Switch actuation
By conveyor belt
Cable entry
1 entry tapped for Pg 13.5 cable gland, cable outer diameter: 9…12 mm conforming to NF C 68-300
Contacts insulation form
Za
Number of steps
2
Minimum torque for tripping
1 N.m
Minimum actuation speed
0.01 m/min
Tripping angle
10 ° for fault signalling
18 ° for stopping of the conveyor belt
Maximum displacement angle
-70 °
70 °
Contact code designation
A300, AC-15 (Ue = 240 V), Ie = 3 A conforming to IEC 60947-5-1 appendix A
Q300, DC-13 (Ue = 250 V), Ie = 0.27 A conforming to IEC 60947-5-1 appendix A
[Ui] rated insulation voltage
300 V conforming to UL 508
500 V (pollution degree 3) conforming to IEC 60947-1
500 V (pollution degree 3) conforming to VDE 0110
300 V conforming to CSA C22.2 No 14
Maximum resistance across terminals
25 MOhm conforming to IEC 60255-7 category 3
[Uimp] rated impulse withstand voltage
6 kV conforming to IEC 60664
6 kV conforming to IEC 60947-1
Short-circuit protection
10 A cartridge fuse, type gG
Electrical durability
5000000 cycles, DC-13, inductive load type, 120 V, 4 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, inductive load type, 24 V, 7 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, inductive load type, 48 V, 10 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
Mechanical durability
300000 cycles
Width
85 mm
Height
95 mm
Depth
75 mm
Net weight
1.155 kg
Terminals description ISO n°1
(11-12)NC
(13-14)NO
Shock resistance
30 gn for 18 ms conforming to IEC 60068-2-27
Vibration resistance
9 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
IP degree of protection
IP65 conforming to IEC 60529
Overvoltage category
Class I conforming to IEC 61140
Class I conforming to NF C 20-030
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…70 °C
Protective treatment
TC
Standards
IEC 60204-1
NF C 79-130
IEC 60947-5-1
CSA C22.2 No 14
IEC 60204-1
IEC 60947-5-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
12.300 cm
Package 1 Width
9.000 cm
Package 1 Length
31.500 cm
Package 1 Weight
1.614 kg
Unit Type of Package 2
S03
Number of Units in Package 2
6
Package 2 Height
30.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
10.180 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
RoHS exemption information
Yes
Circularity Profile
No need of specific recycling operations
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months

Expand all

Technical Drawings

Dimensions

epds
  • (1) 70° max.
  • (2) 1 plain entry for Pg 13.5 cable gland

Wiring Diagram

2 Single-pole CO Snap Action

epds
  • (A) 1 contact
  • (B) 2 contact

Wiring Diagram

2 Single-pole CO Snap Action

epds
  • (A) 1 contact
  • (B) 2 contact
  • (A) 1 contact
  • (B) 2 contact

Functionnal Diagram

epds
  • (A) 1st contact
  • (B) 2nd contact
  • (1) Closed
  • (2) Open
  • (3) Tripping
  • (4) Resetting

Expand all

Related products & accessoires

img
XCRZ901

Limit switch lever, Limit switches XC Standard, XCRT, zinc plated steel with drum

img
XCRZ902

Limit switch lever, Limit switches XC Standard, XCRT, stainless steel with drum

img
XCRZ903

Limit switch lever, Limit switches XC Standard, XCRT, stainless steel with drum

img
XCRZ42

Limit switch contact block with mounting plate, Limit switches XC Standard, XCRZ, 2 C/O, snap action

Back to top

arrow