XUBLAKCNM12T
Photoelectric sensors XU, XUB, emitter, laser, 12...24 VDC, M12
Commercialized
Expand all
Datasheet
Range of product
Telemecanique Photoelectric sensors XU
Series name
Application material handling
Electronic sensor type
Photo-electric sensor transmitter
Sensor name
XUB
Sensor design
Cylindrical M18
Detection system
Thru beam
Material
Plastic
Supply circuit type
DC
Wiring technique
3-wire
Electrical connection
1 male connector M12, 4 pins
Product specific application
-
Emission
Red laser thru beam class 1 670 nm conforming to IEC 60825-1
[Sn] nominal sensing distance
0…100 m thru beam need a receiver
Enclosure material
PBT
Lens material
PMMA
Add on input
Test by emission breaking
Status LED
1 LED (green) for supply on
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Supply voltage limits
10…30 V DC
Switching capacity in mA
<= 100 mA (overload and short-circuit protection)
Switching frequency
<= 1500 Hz
Maximum voltage drop
<1.5 V (closed state)
Current consumption
25 mA no-load
Maximum delay first up
80 ms
Maximum delay response
0.4 ms
Maximum delay recovery
0.4 ms
Diameter
18 mm
Length
66 mm
Net weight
0.04 kg
Product certifications
UL
CE
CSA
CE
CSA
Ambient air temperature for operation
-10…45 °C
Ambient air temperature for storage
-40…70 °C
Vibration resistance
7 gn, amplitude = +/- 1.5 mm (f = 10…55 Hz) conforming to IEC 60068-2-6
Shock resistance
30 gn (duration = 11 ms) conforming to IEC 60068-2-27
IP degree of protection
IP67 double insulation conforming to IEC 60529
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
3.400 cm
Package 1 Width
7.400 cm
Package 1 Length
12.800 cm
Package 1 Weight
41.000 g
Unit Type of Package 2
S02
Number of Units in Package 2
35
Package 2 Height
15.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
1.796 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Technical Drawings
Dimensions
Mounting
Adjustment
- (1) Adjust the focusing point of the laser beam by rotating the serrated sleeve
- (2) Located on the face of the sensor. Re-tighten fixing screws
Wiring Schemes
M12 Connector
- 1 : (+)
- 2 : Beam break input
- 3 : (-)
Wiring Schemes
Transmitter
- 1 : (+)
- 2 : Beam break input
- 3 : (-)
- BN : Brown
- BU : Blue
- Input 2/VI : Not connected: beam made, connected to (-): beam broken
Curves
Detection Curve (Set to Infinity)
Curves
Excess Gain Curve
- (X) Distance (m)
- (Y) Gain
Curves
Standard Curve
- (X) Distance (m)
- (Y) Gain
- (X) Distance focusing point (m)
- (Y) Minimum size of the object to be detected (mm)
Curves
Detection Limit Curve
- (X) Distance (m)
- (Y) Gain
- (X) Distance focusing point (m)
- (Y) Minimum size of the object to be detected (mm)
- (X) Distance focusing point (m)
- (Y) Minimum size of the object to be detected (mm)
Expand all
Documents & Downloads
Document name
Date
Size
12/16/2023
195.3 kB
12/16/2023
195.3 kB
Document name
Date
Size
Document name
Date
Size
11/29/2023
33.8 MB
11/29/2023
33.7 MB
11/23/2023
34.2 MB
Expand all
Related products & accessoires
XUZA118
90° fixing bracket, Photoelectric sensors XU, accessory for sensor, Ø 18 mm, stainless steel
XUZA218
Adjustable fixing clamp with ball joint, Photoelectric sensors XU, accessory for sensor, Ø 18 mm, bracket plastic
XUZA318
Micrometer adjusting bracket, Photoelectric sensors XU, accessory for sensor, Ø 18 mm, fixing micrometric adjustment, metal
Back to top
