XCMN21F0L1

Limit switch, Limit switches XC Standard, XCMN, M12 metal end plunger, 1NC+1 NO, snap, 1 m

To be discontinued End of commercialization date : 30 December 2024 End of service date : 30 December 2024

green premium

XCMN21F0L1 is replaced by the following product:

img
XCMH21F0L1

XCMH Limit Switches Miniature Plastic M12 head metal plunger NC + NO Snap L1

Commercialised

Commercialised

Quantity :  1

Expand all

Datasheet

Range of product
Telemecanique Limit switches XC Standard
Series name
Standard format
Product or component type
Limit switch
Device short name
XCMN
Sensor design
Miniature
Body type
Fixed
Head type
M12 plunger head
Material
Plastic
Body material
Plastic
Head material
Zamak
Fixing mode
By the head
Movement of operating head
Linear
Type of operator
Spring return plunger metal
Type of approach
Vertical approach, 1 direction
Number of poles
2
Contacts type and composition
1 NC + 1 NO
Contact operation
Snap action
Switch actuation
On end
Electrical connection
Fixed cable
Cable length
1 m
Cable composition
4 x 0.75 mm²
Wire insulation material
PvR
Contacts insulation form
Zb
Positive opening
With
Positive opening minimum force
42.5 N
Minimum force for tripping
8.5 N
Minimum actuation speed
0.01 m/min
Maximum actuation speed
0.5 m/s
Contact code designation
B300, AC-15 (Ue = 240 V), Ie = 1.5 A conforming to IEC 60947-5-1 appendix A
R300, DC-13 (Ue = 250 V), Ie = 0.1 A conforming to IEC 60947-5-1 appendix A
[Ui] rated insulation voltage
300 V (pollution degree 3) conforming to UL 508
400 V (pollution degree 3) conforming to IEC 60947-5-1
300 V (pollution degree 3) conforming to CSA C22.2 No 14
Maximum resistance across terminals
25 MOhm conforming to IEC 60255-7 category 3
[Uimp] rated impulse withstand voltage
4 kV conforming to IEC 60664
4 kV conforming to IEC 60947-1
Short-circuit protection
6 A cartridge fuse, type gG
Electrical durability
5000000 cycles, DC-13, 120 V, 1 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, 24 V, 3 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, 48 V, 2 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C
Mechanical durability
5000000 cycles
Width
30 mm
Height
76 mm
Depth
16 mm
Net weight
0.065 kg
Shock resistance
25 gn for 18 ms conforming to IEC 60068-2-27
Vibration resistance
5 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
IP degree of protection
IP65 conforming to IEC 60529
IK degree of protection
IK04 conforming to IEC 62262
Electrical shock protection class
Class II conforming to IEC 61140
Class II conforming to NF C 20-030
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…70 °C
Protective treatment
TC
Product certifications
CCC
UL
CSA
Standards
CSA C22.2 No 14
IEC 60947-5-1
UL 508
IEC 60204-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
1.6 cm
Package 1 Width
16.0 cm
Package 1 Length
12.0 cm
Package 1 Weight
128.0 g
Unit Type of Package 2
PAL
Number of Units in Package 2
640
Package 2 Height
60.0 cm
Package 2 Width
80.0 cm
Package 2 Length
640.0 cm
Package 2 Weight
107.52 kg
Unit Type of Package 3
S03
Number of Units in Package 3
80
Package 3 Height
30.0 cm
Package 3 Width
30.0 cm
Package 3 Length
40.0 cm
Package 3 Weight
10.962 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
RoHS exemption information
Yes
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months

Expand all

Technical Drawings

Dimensions

epds
  • (1) External diameter 7.5 mm.
  • e : 8 mm max, panel cut-out Ø 12.5 mm. Fixing nut thickness 3.5 mm.

Mounting

Sweep of Connecting Cable

epds
  • (1) : Recommended
  • (2) : To be avoided

Mounting

Mounting with Spacers

epds
  • (1) : Recommended
  • (2) : To be avoided
  • (1) : 2 spacers supplied with the XCMN switch
  • (2) : 2 screws Ø 4mm (not included)

Panel Mounting

Mounting and Fixing Limit Switches by the Head

epds
  • (1) Recommended
  • (2) Forbidden

Setting-up

Plunger or Multi-directional Heads

epds

Wiring diagram

2-pole NC + NO Snap Action

epds
  • (BK) Black
  • (BK-WH) Black White
  • (BN) Brown
  • (BU) Blue

Characteristics of Actuation

Switch Actuation on End

epds

Functionnal Diagram

epds
  • (P) Positive opening point
  • (1) NC contact with positive opening operation
  • (2) Closed
  • (3) Open
  • (4) Tripping
  • (5) Resetting
  • (BK) Black
  • (BK-WH) Black White
  • (BN) Brown
  • (BU) Blue

Expand all

Related products & accessoires

img
XCMN21F2L2

Limit switch, Limit switches XC Standard, XCMN, M12 steel roller plunger, 1NC+1 NO, snap, 2 m

Back to top

arrow