XCSRC32M12

Preventa RFID safety switch, Telemecanique Safety switches XCS, contactless Daisy Chain model, 2 new re pairing enabled

arrow

Commercialized

green premium

Expand all

Datasheet

Range of Product
Telemecanique Safety switches XCS
Product or Component Type
Preventa RFID safety switch
Component name
XCSRC
Design
Rectangular, standard
Size
Transponder 50 x 15 x 15 mm
Reader 119.6 x 30 x 15 mm
Material
Valox
Electrical Connection
2 male connectors
Connector Type
M12 male
Type of output stage
Solid-state, PNP
Safety outputs
2 NO
Number of poles
5
Local signalling
Green, orange and red 2 multi-colour LEDs
[Sa] assured operating distance
0.39 in (10 mm) face to face
[Sar] assured tripping distance
1.38 in (35 mm) face to face
Approach directions
3 directions-transponder with rotary sensing face
[Ue] rated operational voltage
24 V DC - 20...10 %)SELV or PELV IEC 60204-1
[Ie] rated operational current
60 mA
[Ui] rated insulation voltage
30 V DC
[Uimp] rated impulse withstand voltage
0.8 kV IEC 60947-5-2
Protection Type
Short-circuit protection
Maximum switching voltage
26.4 V DC
Switching capacity in mA
200 mA
Switching frequency
<= 0.5 Hz
Maximum discordance time
120 ms + 18 ms per additional switch connected in series
Response time
120 ms + 50 ms typical per additional switch connected in series
Maximum delay first up
5 s
Tightening torque
< 1.5 N.m
Standards
IEC 60947-5-2
IEC 60947-5-3
ISO 14119
Product Certifications
CSA 22-2
FCC
IC
RCM
Ecolab
TÜV
E2
Marking
CULus
TÜV
IC
CE
FCC
RCM
EAC
Safety level
SIL 3 IEC 61508
SILCL 3 IEC 62061
PL = e ISO 13849-1
Category 4 ISO 13849-1
Safety reliability data
PFHD = 5E-10/h IEC 62061
PFHD = 5E-10/h ISO 13849-1
Service Life
20 year(s)
Ambient Air Temperature for Operation
-13…158 °F (-25…70 °C)
Ambient Air Temperature for Storage
-40…185 °F (-40…85 °C)
Vibration resistance
10 gn 10…150 Hz)IEC 60068-2-6
Shock resistance
30 gn 11 ms IEC 60068-2-27
Electrical shock protection class
Class III IEC 61140
IP degree of protection
IP65 conforming to IEC 60529
IP66 conforming to IEC 60529
IP67 conforming to IEC 60529
IP69K conforming to DIN 40050
Category
US10DS222455
Discount Schedule
0DS2
GTIN
00785901028659
Returnability
No
Country of origin
FR
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
1.30 in (3.3 cm)
Package 1 Width
5.83 in (14.8 cm)
Package 1 Length
6.89 in (17.5 cm)
Package 1 Weight
3.74 oz (106.0 g)
Unit Type of Package 2
S01
Number of Units in Package 2
12
Package 2 Height
5.91 in (15.0 cm)
Package 2 Width
5.91 in (15.0 cm)
Package 2 Length
15.75 in (40.0 cm)
Package 2 Weight
3.19 lb(US) (1.447 kg)
Sustainable offer status
Green Premium product
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Yes
Circularity Profile
No need of specific recycling operations

Expand all

Technical Drawings

Dimensions

epds

Connections

M12 Connectors, 5-pin

epds
  • (1) + 24 VDC
  • (2) OSSD2 (O2)
  • (3) 0 VDC
  • (4) OSSD1 (O1)
  • (5) Diagnosis Out (Do)

M12 Connectors, 5-pin

epds
  • (1) + 24 VDC
  • (2) OSSD2 (O2)
  • (3) 0 VDC
  • (4) OSSD1 (O1)
  • (5) Diagnosis Out (Do)
  • (1) + 24 VDC
  • (2) INPUT 2 (I2)
  • (3) 0 VDC
  • (4) INPUT 1 (I1)
  • (5) Diagnosis In (Di)

Connections

Wiring Diagram: Series Connection

epds
  • (1) Start
  • (2) Power circuit
  • (3) Loopback device
  • (4) M12/M12 female jumpers
  • (5) Pre-wired female connectors
  • (6) Diagnostic module (option)

Cat. 4 / PL=e (EN/ISO 13849-1) / SIL3 (IEC 61508) / SILCL3 IEC 62061), if combined with an appropriate Preventa XPS Safety module PL=e / SIL3

NOTE: KM1 and KM2 contactors must have force-guided contacts.

Mounting and Clearance

Mounting and Clearance

Face to Face Mounting (Preferred Configuration)

epds
  • e min. > 2 mm. (e: recommended minimum mounting distance between transponder and reader)
  • d : Detection limit

Mounting and Clearance

Side by Side Mounting

epds
  • e: Recommended minimum mounting distance between transponder and reader.

Correct Mounting Configuration

Mounting and Clearance

Minimum Mounting Clearances between Safety Switches

epds
E1 min. E2 min. E3 min.
45 150 65
E1 min. E2 min. E3 min.
1.77 5.91 2.56

Detection Curves

Face to Face Mounting (Preferred Configuration)

epds
  • Sar: Assured release distance
  • Sao: Assured operating distance
  • (1) Recommended minimum mounting distance between transponder and reader.

Sao and Sar sensing distances along Y axis as function of Z (longitudinal misalignment for X=0)

Detection Curves

epds
  • Sar: Assured release distance
  • Sao: Assured operating distance
  • (1) Recommended minimum mounting distance between transponder and reader.
  • Sar: Assured release distance
  • Sao: Assured operating distance
  • (1) Recommended minimum mounting distance between transponder and reader.

Sao and Sar sensing distances along X axis as function of Z (transverse misalignment for Y=0)

Detection Curves

Side by Side Mounting

epds
  • Sar: Assured release distance
  • Sao: Assured operating distance
  • (1) X=0 for X<0
  • (2) X=0 for X>0
  • (3) Recommended minimum mounting distance between transponder and reader.

Sao and Sar sensing distances along Y axis as function of X (longitudinal misalignment for Z=0mm)

Detection Curves

epds
  • Sar: Assured release distance
  • Sao: Assured operating distance
  • (1) X=0 for X<0
  • (2) X=0 for X>0
  • (3) Recommended minimum mounting distance between transponder and reader.
  • Sar: Assured release distance
  • Sao: Assured operating distance
  • (1) X=0 for X<0
  • (2) X=0 for X>0
  • (3) Recommended minimum mounting distance between transponder and reader.

Sao and Sar sensing distances along Z axis as function of X (transverse misalignment for Y=0mm)

Expand all

Documents & Downloads

Document name
Date
Size
Document name
Date
Size

Back to top

arrow