XS1L04PA311S
Inductive proximity sensors XS, inductive sensor XS1 Ø4, L42mm, stainless, Sn0.8mm, 5..24VDC, M8
Discontinued End of commercialization date : 31 May 2023 End of service date : 31 May 2023
Expand all
Datasheet
Range of product
Telemecanique Inductive proximity sensors XS
Series name
General purpose
Sensor type
Inductive proximity sensor
Device application
-
Sensor name
XS1
Sensor design
Cylindrical Ø 4 mm plain
Size
42 mm
Body type
Fixed
Detector flush mounting acceptance
Flush mountable
Material
Stainless steel
Type of output signal
Discrete
Wiring technique
3-wire
[Sn] nominal sensing distance
0.8 mm
Discrete output function
1 NO
Output circuit type
DC
Discrete output type
PNP
Electrical connection
Male connector M8, 3 pins
[Us] rated supply voltage
5...24 V DC
Switching capacity in mA
<= 100 mA with overload and short-circuit protection
IP degree of protection
IP67 conforming to IEC 60529
Detection face
Frontal
Front material
PPS
Enclosure material
Stainless steel 303
Operating zone
0…0.6 mm
Status LED
Output state: 1 LED (yellow)
Supply voltage limits
5…30 V DC
Switching frequency
<= 5000 Hz
Maximum voltage drop
<2 V (closed)
Current consumption
<= 10 mA no-load
Maximum delay first up
5 ms
Maximum delay response
1 ms
Maximum delay recovery
1 ms
Marking
CE
Threaded length
0 mm
Length
42 mm
Net weight
0.01 kg
Product certifications
UL
CSA
CSA
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…85 °C
Vibration resistance
25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6
Shock resistance
50 gn for 11 ms conforming to IEC 60068-2-27
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.5 cm
Package 1 Width
6.5 cm
Package 1 Length
9.5 cm
Package 1 Weight
21.0 g
Unit Type of Package 2
S01
Number of Units in Package 2
20
Package 2 Height
15 cm
Package 2 Width
15 cm
Package 2 Length
40 cm
Package 2 Weight
645 g
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Circularity Profile
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Technical Drawings
Dimensions
- (1) LED
Minimum Mounting Distances in mm
- e (1) ≥ 2 mm/0.79 in.
- e (1) ≥ 2 mm/0.79 in.
- e (2) ≥ 12 mm/0.47 in.
- e (1) ≥ 2 mm/0.79 in.
- e (2) ≥ 12 mm/0.47 in.
- e (3) ≥ 3 mm/0.12 in.
- e (1) ≥ 2 mm/0.79 in.
- e (2) ≥ 12 mm/0.47 in.
- e (3) ≥ 3 mm/0.12 in.
- d ≥ 4 mm/0.16 in.
- h ≥ 0 mm/0 in.
Tightening torque : 2.2 N.m. (values obtained with washers mounted)
Wiring Schemes
Performance Curves
Standard Steel Target (mm) : 5x5x1
- Pick-up points
- Drop-out points (object approaching from the side)
- (y) Sensing distance in mm
Expand all
Documents & Downloads
Document name
Date
Size
11/23/2023
446.0 kB
Document name
Date
Size
11/23/2023
18.7 MB
11/29/2023
18.8 MB
2/10/2024
19.1 MB
11/29/2023
18.9 MB
Document name
Date
Size
11/15/2023
87.4 kB
Document name
Date
Size
11/29/2023
195.3 kB
11/29/2023
195.3 kB
Document name
Date
Size
11/29/2023
122.2 kB
Expand all
Related products & accessoires
XZCP0566L5
Pre wired connectors XZ, straight female, M8, 3 pins, cable PUR 5 m
XZCP0666L5
Pre wired connectors XZ, elbowed female, M8, 3 pins, cable PUR 5 m
Back to top
