XX512A1KAM8
Ultrasonic sensors XX, ultrasonic sensor cylindrical M12, Sn 0.05 m, 2 NO, M8 connector
Commercialized
Expand all
Datasheet
Range of product
Telemecanique Ultrasonic sensors XX
Sensor type
Ultrasonic sensor
Series name
General purpose
Sensor name
XX5
Sensor design
Cylindrical M12
Detection system
Diffuse
[Sn] nominal sensing distance
0.05 m fixed
Material
Plastic
Type of output signal
Discrete
Discrete output function
2 NO
Wiring technique
4-wire
Discrete output type
PNP and NPN
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Electrical connection
Male connector M8 4 pins
[Sd] sensing range
0.0064…0.051 m
Beam angle
11 °
IP degree of protection
IP67 conforming to IEC 60529
Enclosure material
ULTEM
Front material
Epoxy
Thread type
M12 x 1
Supply voltage limits
10…28 V DC
[Sa] assured operating distance
0.0064…0.051 m
Maximum differential travel
0.7 mm
Blind zone
0…6.4 mm
Transmission frequency
500 kHz
Repeat accuracy
0.7 %
Deviation angle from 90° of object to be detected
-10…10 °
Minimum size of detected object
Cylinder diameter 2.5 mm
Flat bar 1 mm wide
Flat bar 1 mm wide
Status LED
Supply on: 1 LED (green)
Output state: 1 LED (yellow)
Output state: 1 LED (yellow)
Current consumption
25 mA
Maximum switching current
100 mA with overload and short-circuit protection
Maximum voltage drop
1 V
Switching frequency
<= 125 Hz
Maximum delay first up
20 ms
Maximum delay response
2 ms
Maximum delay recovery
2 ms
Marking
CE
Threaded length
38 mm
Height
12 mm
Width
12 mm
Depth
50 mm
Net weight
0.011 kg
Standards
IEC 60947-5-2
Product certifications
UL
Ambient air temperature for operation
-20…65 °C
Ambient air temperature for storage
-40…80 °C
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 (f = 10…55 Hz)
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Resistance to electrostatic discharge
8 kV level 4 conforming to IEC 61000-4-2
Resistance to electromagnetic fields
10 V/m level 3 conforming to IEC 61000-4-3
Resistance to fast transients
1 kV level 3 conforming to IEC 61000-4-4
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
9.5 cm
Package 1 Width
4.0 cm
Package 1 Length
6.6 cm
Package 1 Weight
28.0 g
Unit Type of Package 2
S02
Number of Units in Package 2
35
Package 2 Height
15.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
1.258 kg
Sustainable offer status
Green Premium product
REACh Regulation
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty
18 months
Expand all
Technical Drawings
Dimensions
Minimum Mounting Distances
Side by side
- e : respect the distances indicated on the detection curves
Minimum Mounting Distances
Face to face
- e : respect the distances indicated on the detection curves
- e > 4 x Sn
Wiring Diagram
4-Wire Type
- (1) (+)
- (2) PNP output
- (3) (-)
- (4) NPN output
4-Wire Type
- (1) (+)
- (2) PNP output
- (3) (-)
- (4) NPN output
- BN Brown
- WH White
- BU Blue
- BK Black
Curves
- (1) Parallel movement
- (2) Distance
- (3) Blind zone for diffuse sensors.
Expand all
Documents & Downloads
Document name
Date
Size
11/23/2023
475.9 kB
11/23/2023
17.7 kB
11/23/2023
55.8 kB
Document name
Date
Size
11/23/2023
17.9 MB
11/23/2023
18.1 MB
11/23/2023
17.9 MB
11/23/2023
18.0 MB
Document name
Date
Size
11/23/2023
195.3 kB
11/23/2023
195.3 kB
Document name
Date
Size
11/23/2023
343.8 kB
Expand all
Related products & accessoires
XSZB112
Inductive proximity sensors XS, accessory for sensor, Ø 12 mm, fixing clamp with indexing, plastic
XUZ2001
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, M12 rod
XUZ2003
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, support for M12 rod
XUZB2012
Photoelectric sensors XU, accessory for sensor, 3D fixing kit, bracket with ball joint, Ø 12 mm
XXZ12
Accessory for XX5, 90° fixing bracket, metallic
XZCC8FCM40V
Female, M8, 4 pin, elbowed connector, cable gland M9.5 x 1
XZCC8FDM40V
Female, M8, 4 pin, straight connector, cable gland M9.5 x 1
Back to top
